Reliability Discussion Forum  

Go Back   Reliability Discussion Forum > Reliability Discussion Forums > Reliability Employment Forums > Open Positions

Reply
 
Thread Tools Display Modes
  #1  
Old August 16th, 2016, 09:43 AM
Dan Z Dan Z is offline
Junior Member
 
Join Date: Aug 2016
Posts: 2
Default Product Test Engineer (Electrical) - S&C Electric Company

This position has been filled. Thank you for your interest.
Position Location: Franklin, WI
Apply to this job now...

The Human Energy of S&C
Integrity, enthusiasm, sustained energy. These are the traits that S&C has always looked for and found when seeking people to join our 100% employee-owned team. S&C supports these qualities with a strong package of pay and benefits, excellent education and training programs, a challenging work environment, and broad opportunities for advancement.

JOB SUMMARY
The Power Quality and Energy Storage group (PQES) designs and manufactures power quality systems and power conversion systems for commercial, industrial, electric utility and distributed generation markets. This position is part of the PQES Qualification & Validation Testing group and has primary responsibility for design verification testing and validation testing for new and existing inverter-based Energy-Storage Systems, Uninterruptible Power Systems (UPS), and Reactive Compensation systems. In this position you will report to the Manager of Reliability Engineering and be located in S&Cís Franklin location, however some travel may be required.
The responsibilities of this position include, but are not limited to, the following:


  • Planning, scheduling, preparing and executing test plans/procedures for completing Product Characterization tests, System Characterization tests, Type-Tests, and Engineering Verification Tests; and, Regulatory Agency compliance testing (Safety, EMC/ EMI, performance to Codes and Standards, etc.) to meet product performance specifications.
  • Reading and interpreting electrical schematics and datasheets.
  • Designing, assembling, testing and troubleshooting electrical and electronic circuits and fixtures and assemblies with digital, analog and programmable components.
  • Testing and troubleshooting power electronics products, controls circuits and systems.
  • Technically assessing product quality and reliability issues through investigating product RMA returns, establishing test standards, methods, test environment; analyzing and evaluating findings and failures; performing root cause analysis; testing for cause and effect; reliability modeling using software and physical modeling tools; writing RMA failure analysis and qualification reports; and confirming countermeasures.
  • Continuously improve Qualification & Validation testing activities, and support product quality and reliability improvement initiatives within the Qualification & Validation Test team.
  • Safely and effectively operating energized equipment, with voltages up to 480VAC, 900VDC, and currents up to 3000A.
  • Must be able to organize, handle and perform multiple assignments and tasks simultaneously in a fast-paced, project-driven team environment with electrical, mechanical, and embedded-software engineers.
To select this job as one of interest to you, at a minimum, you must have the following:
  • BS degree in Electrical Engineering or equivalent experience.
  • 4 to 5 Years of substantial experience in electrical system testing, power electronics testing, embedded controls testing, test setup design and assembly, RMA root-cause investigation and problem solving.
  • Solid understanding of lab test and measuring instrumentation including experience with electrical, mechanical, thermal, and EMC test equipment for design characterization, sub-system and product qualification/ validation, and reliability characterization.
  • Ability to work both independently and collaboratively in a team service-oriented environment.
  • Energetic, self-motivated, highly organized, and self-disciplined under close deadlines, across cross-functional team requirements.
  • Excellent communication skills, both written and verbal.
  • Proficient computer skills, including Microsoft Office tools and data-acquisition software.
  • Ability to travel without restrictions up to 10% of the time.
COMPANY OVERVIEW:
S&C Electric Company is a global provider of equipment and services for electric power systems. Founded in 1911, the Chicago-based company designs and manufactures switching and protection products for electric power transmission and distribution.

S&C's products help deliver electric power efficiently and reliably. Some are used to switch circuits. Others minimize damage to equipment in the event of a fault or reduce the area of an outage by automatically rerouting power flow; S&C's sophisticated power-quality products can deliver uninterrupted power for an entire facility, for crucial process industries.

In addition, S&C offers a wide range of engineering, laboratory, and testing services for electric utilities and commercial, industrial, and institutional power systems.

S&C provides solutions for customers worldwide. The company has engineering offices and manufacturing facilities in Chicago, Illinois; Franklin, Wisconsin; Alameda, California; Duvall, Washington; Rockville, Maryland; and Orlando, Florida. S&C subsidiaries operate in Toronto, Canada; Curitiba, Brazil; Mexico City and Aguascalientes, Mexico; Wales, United Kingdom; South Yarra, Australia; and Suzhou, China.

Thank you for your interest in S&C Electric Company. S&C has a proud and longstanding tradition of providing equal employment opportunities without regard to race, color, creed, religion, gender, age, sexual orientation, gender identity, national origin, disability, veteran status, or marital status. Further, S&C is committed to taking affirmative action to ensure that qualified females, minorities, veterans, and persons with disabilities can pursue equal employment opportunities. For information regarding equal employment opportunity, please see http://www.dol.gov/ofccp/regs/compliance/posters/pdf/eeopost.pdf.

Last edited by Dan Z; October 6th, 2016 at 06:42 AM. Reason: Position has been filled.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 06:35 AM.


Powered by vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright ©1992-2014 ReliaSoft Corporation, All Rights Reserved